Blog

High-voltage power lines typically utilize aluminum conductor steel-reinforced (ACSR) cables rather than pure copper wires. This choice is based on se

Aluminum-magnesium-silicon (Al-Mg-Si) alloys are the most widely used aluminum alloys for wires and cables. In 2020, global consumption of these alloy

The LJ16 aluminum stranded conductor has a relatively small cross-sectional area. If bolted connections are used, the installation process becomes cum

All-aluminum alloy stranded conductors typically utilize aluminum-magnesium-silicon alloys—such as the 6101 and 6201 series—commonly in the T1 or T4 t

Where: αs is the linear expansion coefficient of the steel wire (11.5 × 10⁻⁶ 1/℃);

The current-carrying capacity (ampacity) of a stranded conductor is defined as the maximum current it can continuously carry while operating at its ma

High-capacity conductors are typically constructed by concentrically stranding an inner core—composed of high-strength Invar (nickel-iron alloy) wires

Heat-resistant aluminum alloy conductors play a vital role in power transmission. Their production process involves several key stages, which are deta

Power transmission using heat-resistant aluminum alloy conductors often involves the transfer of "natural power" (or surge-impedance-loading power). S

The design of overhead insulated distribution lines must account for route selection, the determination of meteorological parameters, and the technica

A primary issue with insulated conductors in practical application is their susceptibility to line breakage during lightning strikes. For instance, in

Direct burial involves placing cables directly into the ground. This method offers advantages such as simple construction and low costs.